Instructions
B15 zipLED™ Bulbs
Example: ZL-B15-X8
Step 1 : Turn OFF fixture, remove lens, remove bulb.
Step 2 : Install ZL-Base, same as incandescent bulb.
Step 3 : Place and adhere strips onto fixture metal backing.
Step 4 : Plug strips into base. Move to different holes till ON.
Step 5 : Re-install lens. Turn fixture ON.
W9 zipLED™ Bulbs
Example: ZLS-W9-X9
Step 1 : Turn OFF fixture, remove lens, remove bulb.
Step 2 : Install W9-Base, same as incandescent bulb.
Step 3 : Place and adhere strips onto fixture metal backing.
Step 4 : Plug strips into base. Move to different holes till ON.
Step 5 : Re-install lens. Turn fixture ON.
G4H nexLED™ Bulbs
Example: NL-RV3-G4H
Step 1 : Turn OFF fixture, remove lens, remove bulb.
Step 2 : Plug the base into the original slot.
Step 3 : Turn fixture ON.
G4F nexLED™ Bulbs
Example: NL-RV3-G4F
Step 1 : Turn OFF fixture, remove lens, remove bulb.
Step 2 : Plug the base into the original slot.
Step 3 : Maneuver the light toward center till in desired position.
Step 4 : Turn fixture ON.
fLEDescent™ Kits
Example: FLD-12
Step 1 : Turn OFF fixture, remove lens, remove bulbs, remove metal cover.
Step 2 : Place and adhere strips on fixture in place of old bulbs.
Step 3 : Place and adhere regulator with screws facing wires on strip.
Step 4 : Pull sleeves off wires on strips and twist like colors together.
Step 5 : Put end of white wire in one hole on regulator, screw in.
Step 6 : Put end of black wire in other hole on regulator, screw in.
Step 7 : Cut black wire and twist with black wire from regulator.
Step 8 : Cut white wire coming from the back of the fixture
Step 9 : Twist the white wire from the regulator with the cut white wire.
Step 10 : Put metal cover and lens back on the fixture, turn on light
